La verdad de muy buena calidad , me gustó mucho la forma como brilla en el sol ,muy recomendado
Spectral Effects Clear Frame Keeper
$96.14
YOUR FRAME, ILLUMINATED ✨
Universal fit for all bike types & Sizes
Easy, bubble-free Install
Free U.S. Shipping w/ orders over $50.
Our industry-leading frame protection is easy to install and provides durable protection against scratches, chips, shuttle rub, and whatever else is thrown it's way.
Our universal kit is designed to fit all bikes and sizes and comes with 6 easy-to trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, each piece can be trimmed down to desired length and width.
Original/Large Dimensions:
- Toptube & Downtube: 22.5" x 3.2"
- Chainstays & Seatstays: 13" x 1.4"
Kid's Dimensions:
- Toptube & Downtube: 17" x 2.4"
- Chainstays & Seatstays: 11.2" x 1.2"
If you are a visual learner, checkout this lovely installation video
1. Clean your bike thoroughly and wipe frame with isopropyl alcohol. Wash your hands to ensure you don’t leave any dirty fingerprints under the glue. If it’s below 50 degrees Fahrenheit, roll your bike indoors for the following steps.
2. Grab a pair of scissors or an exacto knife. All pieces are designed for larger frames and will likely need to be trimmed before mounting. Before removing the backing, line each piece up to your frame and mark any pieces that need to be shortened or thinned. Trim from the bottom and make sure to round any hard edges (this will help it from pulling up over time).
3. Remove backing and center the guard where you want it. Make sure to do any repositioning before applying pressure. Once you’re happy with the position, lightly tack the center of the guard from top to bottom. Apply pressure from center to sides, pushing out any air/bubbles with your thumbs. We don’t recommend wet application with our material.
Pro Tips:
• Lightly blasting each piece with a hairdryer or heat gun before applying pressure warms the adhesive and makes for an easier application.
• If you have issues wrapping guard around curves, add additional relief cuts where needed.
• To avoid leaving finger prints on transparent Frame Keepers, wet your finger tips if you need to reposition the guard.
• Use a vinyl squeegee tool to help eliminate bubbles during the application process.
• Get clever with your scrap pieces! Throw them on the seat tube, top of the downtube, or wherever you may experience cable rub.
Removal:
ALWAYS use heat when removing Frame Keeper to ensure clean removal. We also recommend using heat when repositioning the Frame Keeper during application.
HOW WILL MY KIT FIT?
ROAD / GRAVEL
One kit provides fuller coverage on the smaller tubes of road and gravel bikes.
MOUNTAIN
One kit provides mid coverage on the larger tubes of most mountain bikes.
MOUNTAIN - 2 KITS
Two kits provide fuller coverage on mountain bikes. Recommended for e-bikes.
Quality Materials
- High tack, flexible and easy-to-install material that conforms to the curves and contours of the frame while providing ample protection. At 10 mil thick it's the goldilocks thickness between durabilitly and conformability.
- High resolution graphics digitally printed with industry-leading equipment and topped with ultra-thick UV and scratch resistant laminate.
Customer Reviews
Overall rating: 4.6 / 5 from 22 reviews.
Pretty good instructions, we realized after it was flipped for the top frame piece but still works great!
Not the world's greatest picture, sorry. I wanted to add some sparkle to my boring black Enduro (that someone else messed the finished up on removing ride wrap) and this stuff did the trick for the top tube. It is thick and I think that makes it easier to apply. Took me about 5ish minutes with the hair dryer from the point of cutting it to being done. Only one little bubble, haha, I didn't feel like fixing it. It's really sparkly in direct sun.
This wrap is sweet! I love the oil slick, iridescent look. I got two kits for my e-bike which allowed me to wrap more of the sides.
Easy install, super happy with the product. Lots of waste though. A good print setup guy, and a new dye would give you more space to give away more extra circles, rectangles, etc. Will still purchase more in the future as I have 11 bikes as of this review.
The frame protectors look great. They were easy to apply after reading the instructions. It helps a lot to separate the pieces by cutting them apart from the master sheet prior to doing your test fit. I used two large kits for my Trek Fuel EX-e.
I'm very happy with how this looks on my Kona Honzo DL !! I'm even more happy with the customer service, I had issues with the first wrap I did and they were on top of helping me out and getting the issues fixed ASAP!! I will definitely be doing more business with Groundskeeper in the future!!
Fast shipping, and it went on pretty easily. Very pleased with how it looks.
Obsessed with how my bike now looks in the sun :)
This was fairly easy to apply with the help of a hair dryer, squeegee, and going slowly. I did end up with a few air bubbles, but they're not that noticeable. It took me a couple hours to apply including bike prep.
Look at this sick frame!! I bedazzled my bike and now I'm in love with it. I literally cannot stop taking pictures of it. The iridescence is fantastic and I look like a flash on the trail. ⚡
I knew it was going to look cool, but it absolutely exceeded my expectations. I smile every time I look at my bike. It was the perfect addition to a boring white bike.
Easy to install, used blow dryer on heat setting, applied slowly. Just wish the reflective color was a bit more pastel or just blue/purple/green gradient instead of being the whole rainbow but still looks cool and gives my boring silver bike a bit more pop of color
I’m disappointed with how the frame wrap turned out. In the online pics, the seams are hardly noticeable, but when installed they are very noticeable and not what I expected. Unfortunately, I don’t like the look and will be removing it from the bike.
Love this product. Easy to install. Nice thick quality material. Had extra product to add to additional areas.
Loving the stickers!
This looks amazing and still shows the beautiful color of my bike underneath. I ended up getting a few bubbles on the forks, and I probably should have gone a little slower to avoid it. I look forward to seeing how my other bike looks with the snake charmer kit that should be here tomorrow.
Hard to Capture but looks nice and very thick material so will Protect my frame well I’m sure. Adding heat with a blow dryer befofe putting on helped a lot!!
Have matte bike. These don’t work on matte bike. You should specify that when ordering. On gloss bike they would be great. But I feel like I wasted $60
Installation was easy and it looks really awesome when I was done, though after a couple rides I'm having problems with part of the wrap peeling up. I ended up with wrinkles after trying to put it back on. I followed the instructions exactly. I took some of the scrap strips to wrap around the spots that started peeling which helped a little bit.
Great product and fast shipping!
My wife loved the colors. It adds so much more than just protection.