Fork Keeper

Protect your mountain bike fork with the Fork Keeper, crafted from the same trusted, high-quality material as our renowned frame protection. This universal-fit kit is designed to seamlessly blend into any fork, offering durable, nearly invisible coverage. Installation is quick and easy, and it pairs perfectly with our custom fork decals, which adhere smoothly over the fork protection.

1. Remove front wheel and all decals on your fork. Clean fork thoroughly and wipe with isopropyl alcohol. Wash your hands to ensure you don’t leave dirty fingerprints under the glue and install in a warm room (no cold garages).

2. For 27.5“ forks with air bleeder valves, trim off square tab at top of stanchion piece (pink cut line on diagram) using scissors or an exacto knife. For 26” forks, the stanchion piece may need to be trimmed along the relief cut line (white cut line on diagram). Before removing the liner, line pieces up to your fork to ensure no other trim adjustments are needed. When trimming, round any hard edges (this will help vinyl from pulling up over time).

3. Remove liner and center guard on the stanchion with seam facing the inside of the fork toward the wheel. Make sure to do any repositioning before applying pressure. Once happy with position, tack the center of the guard from top to bottom. Apply pressure from center to edges, pushing out any air/bubbles with your thumbs. We don’t recommend wet application with our material.

4. Apply fork decals over top of Fork Keeper

The Fork Keeper is a universal fit designed to fit 29", 27.5" and 26" forks, and even provides a full coverage on gravel and road forks. We provide trim guides for 26" forks and any forks with bleeder valves.